Installation and operation safety of cassette furnace gas cylinders

There are two ways to install gas cylinders for cassette furnaces: one is the adsorption type, which is equipped with a gas cylinder interface adsorption locking device at the cassette furnace interface. The other is the pressure rod type, which is the pressure lock on the front panel after the gas cylinder is installed. No matter which kind is convenient and fast, the operation is guaranteed after correct installation.

Precautions for adsorption installation

When installing, please align the recessed cutout of the gas cylinder guide with the raised part of the gas cylinder embedded guide of the portable furnace. After correctly aligning, the interface will automatically adsorb and fix the gas cylinder firmly.

Precautions for rod type installation

When installing, please align the recessed cutout of the gas cylinder guide with the protruding part of the gas cylinder embedded guide of the portable stove.

The correct process of installing the gas cylinder

Turn the ignition switch to the "OFF" direction until it stops, open the side cover; remove the cap of the gas cylinder, and confirm that the valve stem of the gas cylinder head and no foreign matter; confirm that there is no foreign matter in the cassette furnace interface; The quasi-embedded guide rail protruding part can be installed smoothly and tightly attached; the suction type will automatically adsorb the gas cylinder, and the pressure rod type will press down the pressure on the front panel; cover the side cover.