Gas stove manufacturers

gas stove / commercial induction cooker / electric ceramic stove, etc.

Hotline:

0750-3760779

通用banner

When installing a built-in gas stove, these data must be kept in mind

2021-06-23 09:50:18
a

Nowadays, families pay more and more attention to the design sense of home decoration, and kitchen decoration is no exception. The built-in stove is beautiful, space-saving, and easy to clean, which can make the kitchen appear more harmonious and integrated, creating a kitchen environment. Nowadays built-in gas stove has become the choice of many people to decorate the kitchen, so how to install the built-in gas stove correctly?

① When installing the built-in gas stove, cover the hole template on the countertop of the cabinet, dig out the embedded hole of the stove according to the size of the hole plate, put the stove in, and confirm that it is firm.


② There must be more than 20cm of free space at the bottom of the stove, and more than 100cm of free space at the top.


③ It is recommended that the width of the countertop of the cabinet should be more than 55cm, and there must be vents with blinds in front of the cabinet.


④ Open the package and check the accessories provided by the manufacturer to confirm that the accessories are correct.


⑤ Connect the stove correctly: The rubber tube should be inserted into the position with the red line of the gas stove inlet joint and fastened with a pipe clamp. The quality of the rubber tube used should meet the national standard, and please pay attention to its expiration date.


⑥ Battery installation: Please remove the plastic cover of the battery at the + level before installing the supplied battery. The battery box of the cooker is located at the bottom of the cooker. Open the battery box cover to confirm the positive and negative poles and then insert the battery.


⑦ Inspection: after installation, open the main switch of the gas valve and check whether there is air leakage at both ends of the connecting hose. During inspection, apply soap liquid to the joint. If there are bubbles, please close the valve and fix the rubber pipe again. Only after confirming that there is no air leakage can it be used.

CopyRight @ 2019 Jiangmen Ruijin Electric Manufacturing Co., Ltd. Specializing in燃气炉,商用电磁炉,电陶炉厂家,Welcome to inquire!
| support:

商用电磁炉